*SPORT MODE 'clean install'* | Forums BMWauto.net || BMW AUTO - cars, motorcycles, tuning, ads, photos  
 

  Home    |    BMW website    |    BMW History    |    Contact us    |
  FORUMSbmwauto.net BMW Disscussion forums || www.bmwauto.net/forums
   Menu
    General BMW
    BMW 3-Series
    BMW 5-Series
   BMW Z-Series
    BMW European Delivery
    BMW FORUMS - home page

  What's Going On?
There are 41 guests on-line

  BMW Forums » BMW discussion forums » BMW Z-Series
  *SPORT MODE 'clean install'*

 *SPORT MODE 'clean install'*



Sup folks...

here are all the parts that are required for a clean install as recommended by Daniel (dwm).


I'll be following these guides for a portion of the install:
http://www.rfdm.com/SportMode/dme.html
http://www.rfdm.com/SportMode/clusterLamp.html

after that, I have no idea how to integrate all the other wires, connectors, and the ASC switch. What I do know is that connector .173 will draw power and ground from the DSC button's connector. According to dwm, I'm basically building a Y-cable to power Island's module, plus a harness for the ASC button.

If someone has installed their sport mode using similar parts, it'd be great if you could post a DIY guide. Help a brotha get his sport mode hooked up!
   Reply » *SPORT MODE 'clean install'*

Here's Island's SM controller which I will be using:



   Reply » *SPORT MODE 'clean install'*

thank you

   Reply » *SPORT MODE 'clean install'*

I think Daniel also shows how to tie into the switches, for example, here. As to the rest, have you talked to the guy you bought the controller from? Some of the work is probably specific to his controller.

The last few months I have been prewiring what I can on my MAC controllers to lessen the details people have to deal with.

I sent off the PCB layout for the fourth generation of the controller early last week and should start testing it by the end of the month. It is smaller, and will have a lower resistance output stage for lighting and flashing 21W bulbs.

   Reply » *SPORT MODE 'clean install'*

any of you guys in the Bay Area familiar with the install and willing to help a brotha out? PWEEEEASE!!!

   Reply » *SPORT MODE 'clean install'*

Quote:
I think Daniel also shows how to tie into the switches, for example, here. As to the rest, have you talked to the guy you bought the controller from? Some of the work is probably specific to his controller.

The last few months I have been prewiring what I can on my MAC controllers to lessen the details people have to deal with.

I sent off the PCB layout for the fourth generation of the controller early last week and should start testing it by the end of the month. It is smaller, and will have a lower resistance output stage for lighting and flashing 21W bulbs.
I received John's controller and wiring harness. It installs very easily and provides all the connections that are needed. I'm sure that IslandS52's controller is very similar.


Page 1 of 6

1 2 3 4 5 6



  BMW Forums » BMW discussion forums » BMW Z-Series

 

Forums BMWauto.net (c) 2001-2007