Just bought an M mirror with chrome trim and auto dimming. I'd like to get the auto dimming to work. Looking at the mirror there is a connector inside it with two pin. One I assume is ground and the other is switched ignition. Looking at the TIS, the M Coupe has a connector protruding from the headliner. I think this connector should be in the roof of the Z3 Coupe but I haven't looked.
Anyone done this? Which parts did you buy? If possible could you post with the part numbers so I can check against the ETK.
Thanks a bunch
|
| Reply » How to I install an M mirror into a Z3 Coupe |
I did it in my 3.0 Coupe. I ended up cutting off the stock connector on the mirror side and making the wires long enough to get to the center console. There are 2 wires, one ground and one power (yellow and brown I think). Brown is Ground. I tapped into hot/switched power so the autodim feature runs only when the car is running at the same point as the Passport.
The car side of the connector does not exist in non-M cars.
I didn't buy any parts, you shouldn't need any unless you find the other half of the connector and try to build a car side of the connector yourself.
If you have keyless entry with the receiver in the mirror, it gets much more difficult.....
|
| Reply » How to I install an M mirror into a Z3 Coupe |
Dunno if this will work for the coupe...I did this on a E46 323Ci.
See here for description
I forgot to take pictures, and I tend to ramble on so it may be a little difficult to understand. I can actually see if I can dig up a PDF of the installation procedure for you later tonight. 
|
| Reply » How to I install an M mirror into a Z3 Coupe |
Mirror (non chrome ring) 51 16 7 891 423 $385.00 retail Mirror (chrome ring) 51 16 7 894 729 End caps 51 16 8 197 789 $2.41 retail Wiring harness 51 16 0 001 231 $24.50 retail This harness is for an E46 but is easily modified to work in the Z3. Contacts (can't rememeber if they were male or female) get 4 of each Contact (F) 61 13 0 005 197 Contact (M) 61 13 0 005 198
|
| Reply » How to I install an M mirror into a Z3 Coupe |
Ron,
Do you happen to know the PN for the socket connector used at location A6 of that harness, the one that goes into the fusebox?
I think its 61 13 8 364 846 but I'm not sure...
|
| Reply » How to I install an M mirror into a Z3 Coupe |
Quote: Try 61 13 0 007 439, $1.50 retail
|
Page 1 of 3 |
1 2 3
|