While doing the CDV delete, the hardline from the CDV up to the slave cylinder twisted slightly. Although it looks fine, I'd like to replace it. Anyone have the correct P/N?
This link shows a view but isn't a correct sequence of lines. This one shows a flex/hard line assembly from the slave to the CDV where mine is a 6" hardline only with a short right angle bend on each end.
http://www.realoem.com/bmw/showparts...59&hg=21&fg=10
It's a 2001 Z3 coupe 3.0. I put in a modified / opened-up CDV. The clutch and transmission both have feel better.
|
| Reply » Need P/N of clutch slave cyl hard line |
Quote: While doing the CDV delete, the hardline from the CDV up to the slave cylinder twisted slightly. Although it looks fine, I'd like to replace it. Anyone have the correct P/N?
This link shows a view but isn't a correct sequence of lines. This one shows a flex/hard line assembly from the slave to the CDV where mine is a 6" hardline only with a short right angle bend on each end.
http://www.realoem.com/bmw/showparts...59&hg=21&fg=10
It's a 2001 Z3 coupe 3.0. I put in a modified / opened-up CDV. The clutch and transmission both have feel better. | 
|
| Reply » Need P/N of clutch slave cyl hard line |
That's the one, thanks for the quick reply!
Any suggestions for a good source where I can order on-line?
|
| Reply » Need P/N of clutch slave cyl hard line |
Quote: That's the one, thanks for the quick reply!
Any suggestions for a good source where I can order on-line? | I got mine from Jay Lilley at BMW of Nashville. 615-850-4022. He discounts 25% from suggested retail.
|
Page 1 of 1 |
Menu
Need P/N of clutch slave cyl hard line