Brake cooling ducts from the factory | Forums BMWauto.net || BMW AUTO - cars, motorcycles, tuning, ads, photos  
 

  Home    |    BMW website    |    BMW History    |    Contact us    |
  FORUMSbmwauto.net BMW Disscussion forums || www.bmwauto.net/forums
   Menu
    General BMW
    BMW 3-Series
    BMW 5-Series
   BMW Z-Series
    BMW European Delivery
    BMW FORUMS - home page

  What's Going On?
There are 45 guests on-line

  BMW Forums » BMW discussion forums » BMW Z-Series
  Brake cooling ducts from the factory

 Brake cooling ducts from the factory



I was talking with DWM last night and was telling him that my car has the area for the cutouts for the factory brake cooling ducts, He then explained that the M//s have them there already which was news to me, but good news none the less.
His car is at the Forbes Paddock so if anyone has any or wants to snap off a few pics of the front inner wheel liner where the ducts are visible I would appreciate it
I know the front bumper and such is diff between M//s and non M//s but I'm sure its a easy thing to get around. I think the hardest part will be finding all the Part numbers for the ducts
thanks in advance
max
   Reply » Brake cooling ducts from the factory

Found this interesting, looks like something like this could easily be added to the z3, I have the pick up tube inlet on the air ducting and the brake ducting can be cut out on the inner fender well.
Question to those that race or are familiar with air flow etc. Does the explanation of this product make sense as far as picking up cooling from the inner fender well
http://www.bmpdesign.com/product-exe...category_id/43

   Reply » Brake cooling ducts from the factory

Max I may have some of these pieces. I'll Check

   Reply » Brake cooling ducts from the factory

Quote:
Max I may have some of these pieces. I'll Check
Sweeet, Funny I had just been thinking that you had been away to long Glad to see you are ok. Thanks for checking on the pieces

   Reply » Brake cooling ducts from the factory

Max

I have a complete M bumper cover with the ducts.

I also have the drivers side duct section that goes between the wheel well (square hole) and the bumper duct (round hole). This also has the cutout for the tube that goes up for the engine air intake.

   Reply » Brake cooling ducts from the factory

Quote:
Max

I have a complete M bumper cover with the ducts.

I also have the drivers side duct section that goes between the wheel well (square hole) and the bumper duct (round hole). This also has the cutout for the tube that goes up for the engine air intake.

any pics and how much for the ducting that i need


Page 1 of 3

1 2 3



  BMW Forums » BMW discussion forums » BMW Z-Series

 

Forums BMWauto.net (c) 2001-2007