What kind of tool do you use to undo the two bolts on MAF sensor to the housing? TIA
Reply » Removal of MAF sensor on S54 question
Quote:
What kind of tool do you use to undo the two bolts on MAF sensor to the housing? TIA
A T20 security TORX bit. Mine is a WIHA TR 7015.
Reply » Removal of MAF sensor on S54 question
Quote:
What kind of tool do you use to undo the two bolts on MAF sensor to the housing? TIA
Pic:
Reply » Removal of MAF sensor on S54 question
Yet again BMW chooses to use weird bolt shapes.
BTW I have a set of Torx security bits I picked up from Lowes. I think they are Bosch.
Florian
Reply » Removal of MAF sensor on S54 question
I picked up a set from Kragen- Thanks
Reply » Removal of MAF sensor on S54 question
Quote:
Yet again BMW chooses to use weird bolt shapes.
BTW I have a set of Torx security bits I picked up from Lowes. I think they are Bosch.
Florian
Not as weird as Porsche; their 3-1/2" HFM (as supplied by AA for Stg II turbo application) uses a five (5) point Torx-Plus security bit. They're available, but you have to give quite a bit of information (to be "cleared") before they'll sell you one.
I chose to remove the element before doing this (to allow the filter element to slide on a little further).
Menu
Removal of MAF sensor on S54 question
