BMW tire chock in a '01 M coupe | Forums BMWauto.net

BMW tire chock in a '01 M coupe | Forums BMWauto.net || BMW AUTO - cars, motorcycles, tuning, ads, photos

Home \| BMW website \| BMW History \| Contact us \|

FORUMSbmwauto.net	BMW Disscussion forums \|\| www.bmwauto.net/forums

Menu

General BMW
BMW 3-Series
BMW 5-Series
BMW Z-Series
BMW European Delivery
BMW FORUMS - home page

What's Going On?

There are 44 guests on-line

BMW Forums » BMW discussion forums » BMW Z-Series
BMW tire chock in a '01 M coupe

BMW tire chock in a '01 M coupe

Will do a write up on this tomorrow, mainly on the tool
info which you can use for many things.
With the nutsert tool, I've:
Installed a bunch of X-braces
Replaced the rear license plate mounting rubber crap
in both my coupes.
Mounted the passenger side ballast.
Mounted the tire chock.
I have some (6mmx1.0) stainless steel wing type
thumb screws coming tomorrow for the chock.

Reply » BMW tire chock in a '01 M coupe

I'm getting close to mounting the chock, hope you could mention the tool used for the mounting. thanks

Reply » BMW tire chock in a '01 M coupe

Quote:

Connect to:
http://www.unofficialbmw.com/e36/sus...e_install.html

Reid Tool part number is BTI-800 $43.88. The 6.0 x 1 mm adapter is BTI-930 $8.90.

Connect to:
http://reidtool.com/

Reply » BMW tire chock in a '01 M coupe

lower cost alternative is to use a threaded plastic insert in a drilled hole, should be able to buy them anywhere including the dealer

Reply » BMW tire chock in a '01 M coupe

Quote:

I assume you mean the ones that go in a square opening.
Whoops, just noticed the drilled hole part. Not familar with the round ones. What keeps it from turning? The BMW ones I'm familar with strip easily.

Reply » BMW tire chock in a '01 M coupe

Following pic shows the thumb screw I used to secure the chock.

Page 1 of 2

BMW Forums » BMW discussion forums » BMW Z-Series

Forums BMWauto.net (c) 2001-2007