NOTE# I AM READING THE POSTS AS THEY COME IN AND UPDATING THIS FIRST POST WITH THE NEW DATA
We have lots of part number tidbits scattered around the posts for fixes when we are working around the driveshaft.
I thought I'd try and list them all here.
eg. "as long as the driveshaft is out...."
shift parts:
1. rear support bearing. - 25 11 1 222 015
2. front support bushing - (recommend Ron's shift arm carrier w/ Delrin Bushing
3. Nylon suspension cup 25 11 1 220 600
4. Shift Lever removal TOOL - Randy
5. Selector Rod Joint - 25 11 7 531 315 $10.90
6. Pin 23 41 1 466 134 $
Driveshaft:
1. guibo - 26 11 2 226 527 $ 60.25
2. center support bearing - 26 12 2 227 278 $82.00
3. center bearing tool - 88 88 6 261 040 $37.00
4. Nuts (6 Req) 07 12 9 900 047 $0.40
5. Sleeve 26 11 1 207 093 $9.53
6. Bolt (4 Req) 26 11 1 226 478 $1.25
7. Dust Protector 26 11 1 226 552 $ $1.85
8. Plate 26 11 1 226 553 $ 1.35
9. Nut (4 Req) 26 11 1 227 843 $0.55
10. Bolts (6 Req) 26 11 2 227 195 $ 2.35
11. Nut (2 Req) 26 12 1 229 629 $0.52
12. Ring (2 Req) 26 12 3 648 156 $ 0.68
13. Ring 26 11 7 514 037 $8.00
16. TOOL Puller 88 88 6 007 500 $164.00
17. TOOl Punch 88 88 6 231 160 $20.35
18. Lock Ring 26 12 3 648 156 $0.68
19. Dust Protector 26 11 1 226 553 $1.85
I will try and gather all the p/n's and add other parts as I can.
others are welcome to help.
|
| Reply » Consolidated parts list when removing the driveshaft |
Quote: We have lots of part number tidbits scattered around the posts for fixes when we are working around the driveshaft.
I thought I'd try and list them all here.
eg. "as long as the driveshaft is out...."
shift parts upgrade:
1. rear support bearing. - 25 11 1 222 015
2. front support bushing
Driveshaft:
1. guibo
2. center support bearing
3. center bearing tool - 88 88 6 261 040 37$
4. new bolts for guibo
5. new nuts for guibo
I will try and gather all the p/n's and add other parts as I can.
others are welcome to help. | shift parts upgrade:
1. rear support bearing. - 25 11 1 222 015
2. front support bushing - Ron's shift carrier arm w/Delrin bushings
3. nylon suspension cup - 25 11 1 220 600
4. shift lever removal tool - Randy
Driveshaft:
1. guibo
2. center support bearing
3. center bearing tool - 88 88 6 261 040 37$
4. new bolts for guibo
5. new nuts for guibo
|
| Reply » Consolidated parts list when removing the driveshaft |
See diagram 26_0105 in the ETK for M's; they're all there.
The guibo is a diffferent P/N the non-M cars, and different yet again for the 1.9. Might be true of other parts, I didn't check.
|
| Reply » Consolidated parts list when removing the driveshaft |
Quote: We have lots of part number tidbits scattered around the posts for fixes when we are working around the driveshaft.
I thought I'd try and list them all here.
eg. "as long as the driveshaft is out...."
shift parts upgrade:
1. rear support bearing. - 25 11 1 222 015
2. front support bushing
Driveshaft:
1. guibo
2. center support bearing
3. center bearing tool - 88 88 6 261 040 37$
4. new bolts for guibo
5. new nuts for guibo
I will try and gather all the p/n's and add other parts as I can.
others are welcome to help. | Made up the following list a couple of days ago. Not sure on the pricing and puller tool.
I got a quote back from Samstag for the puller. See below. Haven't heard back from Baum or AST yet. So I'll see what BMW wants.
Was going to order today, but my washing machine flooded the bathroom and I'm in house mod mode now. 36 years and it decides to fail. So much for Maytag.
Will check tomorrow.
Thanks for contacting Samstag Sales about a fine quality tool.
The set is special order, delivery 4-5 weeks this time of year.
Following would be a total for the order.
To add insurance would cost $5.20 extra. For more information, see
our how to order page. http://www.SamstagSales.com/howorder.htm
When contacting us about this item, please have your email
address handy. We track all quotes by your email address.
Kukko 17-K Bearing Separator Set $339.99
TN Tax 9.75% (TN only) $ x.xx
Insurance - buyer's option $ x.xx
Shipping Priority US Mail $ 8.20
-----------------------------------------------------
Total $348.19
Prices are retail.
6 each Nut 07 12 9 900 047 $0.40
1 each Sleeve 26 11 1 207 093 $9.53
4 each Bolt 26 11 1 226 478 $1.25
1 each Plate 26 11 1 226 552 $1.85
1 each Plate 26 11 1 226 553 $1.85
4 each Nut 26 11 1 227 843 $0.55
6 each Bolt 26 11 2 227 195 $2.35
2 each Nut 26 12 1 229 629 $0.52
1 each guibo 26 11 2 226 527 $96.75
1 each Mount center 26 12 2 227 278 $82.50
1 each Ring 26 12 3 648 156 $0.68
1 each Ring 26 11 7 514 037 $8.00
1 each Special wrench tool 88 88 6 261 040 $37.00
1 each Punch 88 88 6 231 160 $29.75
1 each Puller 88 88 6 007 500 $164.00
|
| Reply » Consolidated parts list when removing the driveshaft |
Quote:
Kukko 17-K Bearing Separator Set $339.99
1 each Puller 88 88 6 007 500 $114.80 net
does it come with case like the one from Kukko does? TIS shows all the parts
but no case. | are these the same tool? if they are, that's a big difference!
I have tools so far:
center bearing 88 88 6 261 040 $37
shift lever removal (Randy)
punch 88 88 6 231 160 $20.35
puller 88 88 6 007 500 $114.80
Bearing seperator Kukko 17-K (Same as 88 88 6 007 500 ? )
and wasn't there a guibo centering tool also?
|
| Reply » Consolidated parts list when removing the driveshaft |
Quote:
6 each Nut 07 12 9 900 047 $0.13
1 each Sleeve 26 11 1 207 093
4 each Bolt 26 11 1 226 478 $0.39
1 each Plate 26 11 1 226 552 $1.30
1 each Plate 26 11 1 226 553 $1.35
4 each Nut 26 11 1 227 843 $0.32
6 each Bolt 26 11 2 227 195 $1.13
2 each Nut 26 12 1 229 629 $
1 each Quibo 26 11 2 226 527 $60.25 n
1 each Mount center 26 12 2 227 278 $
2 each Ring 26 12 3 648 156 $0.41
1 each Ring 26 11 7 514 037 | less tools this is all the parts we need for the removal of the driveshaft, and replacing the guibo and center support bearing (you show it as Mount center. right?)
|
Page 1 of 6 |
Menu
Consolidated parts list when removing the driveshaft