Yes, I've searched. And either there isn't anything out there, or I suck at keywords.
1) The plastic trim strip at the rear of the coupe that you can see with the hatch open. It's held on with 6 screws under square plastic trim caps, one screw at each end that's behind other trim pieces and who knows what else. Once those 8 screws are out, what else holds it down? Is it just a "pull up as hard as you can" type thing with those white plastic rivets?
2) The platic surrounds on the driver's and passenger's side locks.
Thanks.
John
|
| Reply » Need help removing two items |
Quote: Yes, I've searched. And either there isn't anything out there, or I suck at keywords.
1) The plastic trim strip at the rear of the coupe that you can see with the hatch open. It's held on with 6 screws under square plastic trim caps, one screw at each end that's behind other trim pieces and who knows what else. Once those 8 screws are out, what else holds it down? Is it just a "pull up as hard as you can" type thing with those white plastic rivets?
2) The platic surrounds on the driver's and passenger's side locks.
Thanks.
John | Six (6) screws and four (4) nuts on the rear hatch trim (at least on the one example I have taken out myself).
No advice on the side locks.
|
| Reply » Need help removing two items |
The handle surrounds on the inside just slide forward or backwards, I forget to be honest.
The ones on the ouside require a special tool. Check out Ron's website for more details.
|
| Reply » Need help removing two items |
Quote: | The ones on the ouside require a special tool. Check out Ron's website for more details. | and I can't find any information on removing the outside surrounds. I see the spanner-type tool for removing the lock cylinder. I see lots of pictures of the inside of the door cavity and the lock assembly. But nothing on removing the black plastic surround plates from the outside.
John
|
| Reply » Need help removing two items |
Quote: and I can't find any information on removing the outside surrounds. I see the spanner-type tool for removing the lock cylinder. I see lots of pictures of the inside of the door cavity and the lock assembly. But nothing on removing the black plastic surround plates from the outside.
John | Here's an article on MZ3.net on how to replace the stock door surrounds with chrome pieces:
http://www.mz3.net/articles/106.html
|
| Reply » Need help removing two items |
John, did you ever have a chance to get the number off that one plastic piece in the rear hatch area I am trying to get?
|
Page 1 of 2 |
Menu
Need help removing two items